Accessing The Light Path Diagnostics Panel - Avaya Aura S8800 Maintaining

Diagnostics LEDs

Accessing the light path diagnostics panel

The light path diagnostics panel is on the top of the operator information panel.
Procedure
1. Slide the blue release button on the operator information panel to the left. Pull
2. Pull down on the unit, so that you can view the light path diagnostics panel
3. Note any LEDs that are lit, and then reinstall the light path diagnostics panel in the
40 Maintaining the Avaya S8800 Server for Avaya Aura
forward on the unit until the hinge of the operator panel is free of the server
chassis.
information.
1 Operator information panel
2 Light path diagnostics LEDs
3 Release latch
server.
Important:
When you slide the light path diagnostics panel out of the server to check the
LEDs, do not run the server continuously with light path diagnostics panel outside
of the server. The panel should be outside of the server for only a short time. The
Comments? infodev@avaya.com
®
SIP Enablement Services November 2009