Printing From Windows 3.1 And Windows Nt - Tektronix Phaser 340 User Manual

Printing from Windows 3.1 and Windows NT

Note
Printing from a PC through an interface port other than the
parallel port requires that an optional PhaserShare card be
installed in the printer.
1. Make sure that you have installed the printer software for
Windows 3.1 or Windows NT, as described in Chapter 2. If you
have not, do so now.
1.
From the Control Panel, double-click Printers.
2. In the Printers window, select the Phaser 340 printer, then click
Setup. A dialog box appears with the printer's name across the
top.
3.
Click on any of the tabs along the top of the dialog box to view and
make selections that control the print features (for example, the
Features tab controls resolution, color correction modes, and
installable options).
For information on print features, see "Selecting print features" on page 3-8.
Refer to the Phaser 340 Drivers and Utilities Printing Reference for detailed
information.
Printing
3-3
User Manual
3