Tektronix Phaser 340 User Manual page 57

9.
In the Windows NT Setup dialog box, type in the same path you
used in Step 7 (for example, B:). Click Continue; the Noncritical
Error dialog box appears.
10. When you are prompted for the location of the PSCRPTUI.DLL file
and the PSCRIPT.DLL file, click Ignore. (These files were installed
4
in Step or were already installed.)
11. When the Create Printer dialog box appears, fill in the other fields
as desired, then click
appears.
12. Select options in the PostScript Printer Setup dialog box.
Enabling the Use Printer Halftoning option is recommended.
Then click ; the Windows NT Setup dialog box appears.
OK
13. If you installed a PostScript printer in Step
to delete it. (Now that the Tektronix printer is installed, this
printer is no longer needed.)
a. Select the printer you want to remove.
b. From the Printer menu, select Remove Printer.
c. At the prompt, click
When you are done updating the Windows NT driver, refer to "Installing
optional fonts" on page 2-52.
; the PostScript Printer Setup dialog box
OK
4 , follow this procedure
to remove the selected printer.
OK
Getting Set Up
2-41
User Manual
2