Tektronix Phaser 340 User Manual page 138

-2
3.
Grasp the maintenance tray by the front edge and lift up while
sliding it out of the printer. Place the maintenance tray on a level
surface.
Note
Once the maintenance tray has been partially used, it leaks drum
fluid if tipped. Contact with the drum fluid poses no known
health risk.
4. Locate the top of the media-pick roller behind the black rubber
transport rollers. To clean the top surface of the media-pick roller,
use either the pre-packaged alcohol-soaked cloth or a lint-free
cloth folded into a two-inch square and soaked with alcohol.
9101-53