Selecting The Default Media Tray Using The Front Panel (Optional) - Tektronix Phaser 340 User Manual

3
Printing
3-16
Phaser 340 Color Printer

Selecting the default media tray using the front panel (optional)

1.
When the printer is on and the Ready message appears, press the
Menu button. The printer displays the first selection in the menu:
Help Pages
<---- ---->
2. Using the left (<----) or right (---->) arrow buttons, scroll
through the selections until the following message appears:
Printer Defaults
<---- ---->
3. Press the Menu button to access printer default selections. Using
the left or right arrow buttons, scroll through the selections until
the following message is displayed:
Default Tray
<---- ---->
Note The Default Tray selection only appears if the optional Lower
Paper Tray Assembly is connected to the printer.
4. Press the Menu button to access default tray selections. The
printer displays the following message:
Default Tray:AutoSelect*
<---- ---->
5.
Using the left or right arrow buttons, scroll through the default
tray selections until you reach the appropriate setting. An asterisk
next to the selection indicates the active setting.
6. Press the OK button to confirm your default tray selection.
7.
Return to the top level of the menu by pressing the
until the printer displays the Ready message.
Menu
Menu
Menu
OK
button
Exit Exit