Tektronix Phaser 340 User Manual page 29

3.
Remove the packing materials from the maintenance tray. Retain
the plastic bag for disposal of the used maintenance tray.
4. Install the maintenance tray by sliding it into the printer.
Note To prevent jams at the media tray, be sure to push the
maintenance tray into the printer until both sides latch firmly
into place.
5.
Close the front cover.
Caution If you move or ship the printer, be sure to remove the
maintenance tray to protect the printer from damage. Refer to
Appendix C, "Moving Your Printer," for more information.
Getting Set Up
9101-37
2-13
User Manual
2