Color Correction - Tektronix Phaser 340 User Manual

3
Printing

Color correction

3-10
Phaser 340 Color Printer
The printer provides TekColor Dynamic Correction, which consists of the
following color correction modes:
Color correction mode
None
Vivid Color
Display
SWOP Press
Euroscale Press
Commercial Press
Monochrome
Use Printer Setting
Vivid Color, the default color correction mode, is generally recommended
for typical office printing.
Note The print driver help window provides a short description of each
color correction mode. To access information, click on the Help
button (for a Macintosh, in the TekColor Options dialog box;
for Windows, in the Tektronix Printer Features dialog box).
You can view an example output of each color correction mode at the bottom
of the printer's startup page. Refer to "Printing the startup page" on
page A-5 for instructions.
Note
If your printer is networked and you have changed the front panel
settings, make sure that you tell other users on the network.
Printer settings affect all prints made with non-Tektronix
drivers.
Description
No correction made to colors.
Default setting. Produces the brightest possible colors.
Adjusts color to closely approximate the colors on a
standard display screen.
Specification for Web Offset Publications. Typically used
to match U.S. press standards.
®
Matches the PANTONE Process Color System Guide ,
Euroscale Edition. Typically used to match European
press standards.
Used to match commercial 3M Matchprint
Prints a color image as a monochrome gray scale.
Outputs color page masters in black-and-white for
photocopying.
Uses the color correction mode specified in the printer
front panel setting rather than any printer driver setting.
®
proofs.