Tektronix Phaser 340 User Manual page 53

13.
Click Close in the Install PostScript Printer from PPD dialog box.
14. At the message, click
15. From the Control Panel, double-click Printers.
16.
In the Printers dialog box, select the Tektronix Phaser 340 printer
you just installed, then click Connect.
17. In the Connect dialog box, select the port the printer is connected
to, then click .
OK
Note
Refer to the README file on the Adobe PS3 Driver for
Windows 3.1 diskette from Tektronix, or to the Adobe
PostScript Printer Driver User Guide, for more detailed
information on installing and using the Adobe PS3 driver.
When you are done installing the Windows 3.1 driver, refer to "Installing
optional fonts" on page 2-52.
; the Control Panel opens.
OK
Getting Set Up
2-37
User Manual
2