Tektronix Phaser 340 User Manual page 93

Manual feed letterhead:
When you manually feed letterhead, orient the
letterhead face down and feed the bottom edge first.
Manual feed transparencies:
transparencies, orient the transparency notch closest to you with the notch
on the right side. The standard Tektronix transparency media is not
notched.
5. When prompted by the front panel, insert one sheet of paper or
transparency media until it stops.
6. After the first sheet enters the printer, wait for the front panel to
prompt you again before feeding the next sheet (approximately
5 seconds).
5
Note
A jam error will occur if you feed the second sheet of media into
the manual feed slot before the front panel prompts you.
When you manually feed Tektronix premium
6
5 Sec.
Printing
9101-18
3-25
User Manual
3