Setting Up The Printer; Quick-Start Installation Guide; Removing The Packing Material - Tektronix Phaser 340 User Manual

2
Getting Set Up

Setting up the printer

Quick-Start Installation guide

Removing the packing material

2-8
Phaser 340 Color Printer
The printer is shipped to you already loaded with ink. To set up the printer
for use, follow these basic steps as described in this chapter:
Remove the packing material from the printer
Optional: Install the Lower Paper Tray Assembly
Unlock the printer transit restraint
Install the start up maintenance tray
Load ink sticks
Select a media tray configuration
Load the media tray(s)
Note To ensure proper printer operation, install the printer on a flat
surface having no more than 3 degrees of tilt. This is
approximately equivalent to lifting one side of the printer up 2 cm
(0.75 inches) off of a flat surface.
A Quick-Start Installation guide is included with the printer. You may want
to reference the instructions in this guide as you set up the printer.
Remove the plastic bag and packing materials surrounding the printer.
Note Save all boxes and packing material in case you need to ship the
printer later.