Cleaning For Ink Smears: Paper Exit Path - Tektronix Phaser 340 User Manual

4
Caring for Your Printer

Cleaning for ink smears: paper exit path

Approximate time to complete: 10 minutes
If you have already performed the "Cleaning for ink smears" cleaning
procedure earlier in this chapter but problems persist, you should manually
clean the paper exit path. Refer also to "Cleaning for ink smears: paper feed
rollers" on page 4-29.
Occasionally stray ink particles become attached to the exit fingers, rollers
and guides under the exit cover causing ink streaks or marks on the top
edge, front or back of prints. When this occurs, you must clean these parts
using both dry and alcohol-soaked swabs. Refer to "Using isopropyl
alcohol" on page 4-20 for more information.
Sample ink smear: paper exit path
9101-62
4-27
User Manual