Installing The Maintenance Tray - Tektronix Phaser 340 User Manual

2
Getting Set Up

Installing the maintenance tray

2-12
Phaser 340 Color Printer
The printer is shipped with a start up maintenance tray that must be
installed before printing is possible. The front panel displays a message
telling you when the start up maintenance tray is low, allowing you to make
a minimal number of prints before the tray is depleted. To avoid printing
delays, always keep an extra maintenance tray available for use in the
printer.
Note When you reorder a replacement maintenance tray for the printer,
use Tektronix order number 436-0294-03.
1.
Open the front cover.
2. Open the maintenance tray shipping box and remove the
maintenance tray.
9101-65