Front Panel Messages - Tektronix Phaser 340 User Manual

Front panel messages

The front panel displays messages indicating the condition of the printer.
Some messages, such as Standby and Warming Up, simply provide status
information. These messages do not require user action. Error messages,
such as Jam:Open Front Cover, require you to perform some action such
as remove a paper jam. Use the following table to determine the appropriate
action for each type of front panel message.
The printer may display a numeric error code when it detects certain types
of problems. If you see a numeric error code, first write down the number.
Try turning off the printer's power and wait at least 15 seconds before
turning the power on again. If that does not solve the problem, call your
local Tektronix office for assistance in the U.S. and Canada at 1-800-835-6100.
Front panel messages
Message
Ready
Initializing
Warming Up
Busy < message >
Processing Data
Waiting For Data
Job Cancelled
Clearing Job
Melting Ink
Unlock Transit
Restraint
Close Front Cover
Close Top Cover
Close Exit Cover
Action
No user action required. The printer is ready to print.
No user action required. Wait for a period of time.
No user action required. Wait for a period of time.
No user action required.
No user action required.
No user action required.
No user action required. Displayed after you press the
Cancel button.
No user action required. May be displayed after you
Cancel
press the button.
No user action required. Displayed during print jobs
that require large amounts of ink.
Unlock the transit restraint on the right side of the
printer before sending print jobs.
Close the front cover.
Close the top cover.
Close the exit cover.
Troubleshooting
6-7
User Manual
6