Garmin G1000 NAV III Line Maintenance Manual page 59

Message
MFD1 DB ERR – MFD1
Chartview database error exists.
PFD1 DB ERR – MFD1
Chartview database error exists.
DB MISMATCH – Aviation
database version mismatch.
Xtalk is off.
DB MISMATCH – Aviation
database type mismatch.
Xtalk is off.
DB MISMATCH – Basemap
database version mismatch.
Xtalk is off.
DB MISMATCH – Terrain
database version mismatch.
Xtalk is off.
DB MISMATCH – Obstacle
database version mismatch.
Xtalk is off.
DB MISMATCH – Terrain
database type mismatch.
Xtalk is off.
SW MISMATCH – GDU software
version mismatch. Xtalk is off.
MANIFEST – PFD1 software
mismatch. Communication
Halted.
MANIFEST – MFD software
mismatch. Communication
Halted.
G1000 Nav III Line Maintenance Manual
190-00352-00
Cause
The MFD has encountered
an error in the Chartview
database.
The PFD has encountered
an error in the Chartview
database.
The G1000 has found the
Jeppesen aviation database
in the PFD and MFD do not
match.
The G1000 has found the
Jeppesen aviation database
types do not match.
The PFD and MFD have
different basemap versions
installed.
The PFD and MFD have
different terrain database
versions installed.
The PFD and MFD have
different obstacle database
versions installed.
The PFD and MFD have
different terrain database
types installed.
The G1000 has found the
PFD and MFD software
versions do not match.
The system has detected an
incorrect software version
loaded in the PFD.
The system has detected an
incorrect software version
loaded in MFD.
Solutions
•
Confirm datacard is inserted properly.
•
Reload Chartview database.
If unable, replace supplemental
o
datacard.
If problem persists, replace the
o
MFD.
•
Confirm datacard is inserted properly.
•
Reload Chartview database
If unable, replace supplemental
o
datacard.
If problem persists, replace the
o
PFD.
•
Load current Jeppesen database to
both displays.
•
Load same type Jeppesen database to
both displays.
•
Contact Garmin Technical Support for
assistance.
•
Insert two identical version Terrain
database cards in the PFD and MFD.
•
Insert two identical version obstacle
database cards in the PFD and MFD.
•
Insert two identical version Terrain
database cards in the PFD and MFD.
•
Load correct software version into both
PFD and MFD.
•
Load correct software version.
Page 2-31
Rev. L