Garmin G1000 NAV III Line Maintenance Manual page 231

B.1.6 Final LRU Configuration (GDU software version 6.01 and earlier)
1. Go to the CONFIGURATION UPLOAD page using the FMS knob.
2. Activate the cursor and highlight the appropriate file in the FILE field.
3. Press the ENT key.
4. Highlight the following LRUs in the SECTION field:
a) GMA1
i.
ii.
iii.
b) GTX1
i.
ii.
iii.
c) GEA1
i.
ii.
iii.
d) GDC1
i.
ii.
iii.
e) GDL1
i.
ii.
iii.
G1000 Nav III Line Maintenance Manual
190-00352-00
Press the LOAD softkey.
Press the ENT key at the START CONFIGURATION UPLOAD prompt.
Press the ENT key at the CONFIGURATION UPLOAD COMPLETE prompt.
Press the LOAD softkey.
Press the ENT key at the START CONFIGURATION UPLOAD prompt.
Press the ENT key at the CONFIGURATION UPLOAD COMPLETE prompt.
Press the LOAD softkey.
Press the ENT key at the START CONFIGURATION UPLOAD prompt.
Press the ENT key at the CONFIGURATION UPLOAD COMPLETE prompt.
Press the LOAD softkey.
Press the ENT key at the START CONFIGURATION UPLOAD prompt.
Press the ENT key at the CONFIGURATION UPLOAD COMPLETE prompt.
Press the LOAD softkey.
Press the ENT key at the START CONFIGURATION UPLOAD prompt.
Press the ENT key at the CONFIGURATION UPLOAD COMPLETE prompt.
Page B-17
Rev. L