1.5 Recommended Tools
The following tools are needed to perform various maintenance tasks on G1000 equipment:
•
Voltmeter capable of measuring 0-32 Volts DC
•
#2 Phillips Screwdriver
•
nd
3/32
inch Hex Tool
•
Digital Level with 0.25 degrees of accuracy capability
•
VHF NAV/COM/ILS ramp tester
•
Transponder ramp tester including Mode S capability for Mode S transponder equipped aircraft
•
Air Data Test Set (ADTS) capable of simulating altitude up to the aircraft's service ceiling
•
GPS indoor repeater (if outside GPS signals cannot be acquired)
•
Headset/Microphone
G1000 Nav III Line Maintenance Manual
190-00352-00
Page 1-17
Rev. L