Garmin G1000 NAV III Line Maintenance Manual page 234

B.1.7 Software Load Confirmation
1. Go to the SYSTEM STATUS page using the FMS knob. Activate the cursor and toggle to the LRU
window.
2. Highlight the specified items in the LRU window and verify the software part numbers and versions
against the ones listed in the front of this manual.
3. De-activate the cursor.
4. Remove the airframe specific Card Loader from the PFD top slot and set aside.
If any software version and/or part number does not match, or is not successfully loaded, do not
continue with post-installation procedures. Troubleshoot and resolve the issue before continuing
(see Section B.3).
5. Proceed to Section B.2 Final Configuration Items
Page B-20
Rev.L
IMPORTANT
LRU SW OK
PFD1 _____
MFD1 _____
GIA1 _____
GIA2 _____
COM1 _____
COM2 _____
GRS1 – GIA1 _____
GMA1 – GIA1 _____
LRU SW OK
GTX1 – GIA1 _____
GEA1 – GIA1 _____
GDC1 – GIA1 _____
GMU1 _____
NAV1 _____
NAV2 _____
GPS1 _____
GPS2 _____
G1000 Nav III Line Maintenance Manual
190-00352-00