Garmin G1000 NAV III Line Maintenance Manual page 222

B.1.4 GIA Configuration (GDU software version 6.01 and earlier)
1. Go to the CONFIGURATION UPLOAD page using the FMS knob.
2. Activate the cursor and highlight the appropriate file in the FILE field.
3. Press the ENT key.
4. Highlight GIA1 in the SECTION field.
5. Press the LOAD softkey.
6. Select YES and press the ENT key to acknowledge the following prompt:
7. Monitor the status of the upload. When the upload is finished, press the ENT key to acknowledge the
following confirmation:
8. Highlight GIA2 in the SECTION field and repeat Steps 5 through 7.
9. View the SUMMARY field and ensure that all items are 'complete':
10. De-activate the cursor.
Page B-8
Rev.L
G1000 Nav III Line Maintenance Manual
190-00352-00