Replacing Both Boot Disks - Avaya Sun Fire V880 Installation & Maintenance

Replacing both boot disks

To replace both boot disk drives:
1. If the system is operating, enter:
/usr/sbin/shutdown -y -i0 -g0
The system shuts down and displays the ok prompt.
2. Press and release the front panel power button to turn off the system.
Wait for the front panel Power/OK LED to turn off.
3. Turn the key switch to the Forced Off position. See the following figure.
!
!
DANGER:
Be sure to turn the key switch to the Forced Off position before handling any
DANGER:
internal components. Otherwise, it is possible for a user to restart the system
remotely while you are working inside it. The Forced Off position is the only key
switch position that prevents an RSC user from restarting the system.
4. Turn off the system monitor.
5. If any external SCSI devices are installed, turn off the SCSI devices starting with the
device that is closest to the system and work towards the farthest device.
6. Unlock and open the front door.
7. Attach one end of an ESD antistatic wrist strap to the system chassis sheet metal and
attach the other end to your wrist. See
information.
Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting
Using an ESD wrist strap
Maintaining disk drives
on page 59 for more
105
May 2006