Installation
This section describes how to install the computer and related peripheral equipment. Use the
following table to check off each required procedure after completion.
Preparing for installation
Unpacking and inventorying the equipment
Setting up power
Peripheral connectivity
Connecting the monitor, keyboard, and mouse
Connecting the remote console modem
Connecting to external
●
●
Turning on the system and verifying POST
Identifying installed PCI cards
Setting the remote console modem options
Turning the system over for provisioning
Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting
on page 35
Connecting the switch link
Connecting to the customer network
Procedure
on page 20
on page 36
on page 39
interfaces:
on page 40
on page 40
on page 41
on page 44
on page 48
Completed
on page 25
on page 38
on page 46
19
May 2006