Probing All Scsi Media Devices - Avaya Sun Fire V880 Installation & Maintenance

Probing all SCSI media devices

This test checks all media devices.
Symptom: The tape, DVD, or external disk drives are reporting errors.
Solution: To check the status of the media devices:
1. Enter:
/usr/sbin/shutdown -y -i0 -g0
to shut down the system.
2. At the ok prompt, enter the following commands:
setenv auto-boot? false
reset-all
The system resets.
3. Enter:
probe-scsi-all
The program displays a message that is similar to the following:
/pci@8,600000/SUNW,qlc@2
LiD HA LUN
0 0 0
1 1 0
2 2 0
6 6 0
3 3 0
4 4 0
5 5 0
/pci@8,700000/scsi@1
Target 5
Unit 0 Removeable Tape
Target 6
Unit 0 Removeable Read Only device
/pci@8,700000/pci@5/SUNW,1sptwo@4
Note:
The actual devices that are listed depends on the devices that are installed in the
Note:
system. This example shows six disk drives, the disk backplane, the tape drive
(target 5), and the DVD drive (target 6).
4. Fix any obvious errors, such as disconnected cables or external drives without power.
Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting
--- Port WWN --- -----Disk description -----
21000004cf72f08f SEAGATE ST373405FSUN3660438
21000004cf721553 SEAGATE ST373405FSUN3660438
21000004cf7213ea SEAGATE ST373405FSUN3660438
508002000016b5b1 SUNW
21000004cf72114b SEAGATE ST373405FSUN3660438
21000004cf7211ae SEAGATE ST373405FSUN3660438
21000004cf7214a3 SEAGATE ST373405FSUN3660438
HP
SUNWGS INT FCBPL9224
C5683A C005
TOSHIBA DVD-ROM SD-M14011009
Tools
169
May 2006