Maintenance
Maintaining PCI cards
This section includes the following topics:
Required references
●
Precautions
●
PCI card configuration
●
PCI card compatibility with CMS loads
●
Maintaining hot-plug PCI cards
●
Replacing the graphics card
●
Installing the XVR-100 software packages (V880 and R3V11 only)
●
Replacing SCSI cards
●
Maintaining HSI/P cards (R3V11 on V880 only)
●
!
!
WARNING:
The graphics card, High-Speed Serial Interface/PCI (HSI/P) cards, and SCSI
WARNING:
cards are not hot-pluggable cards. Before replacing these cards, you must turn
off the computer. For information on how to replace the graphics card, see
Replacing the graphics card
cards, see
HSI/P cards, see
Required references
You need access to the following documents:
Sun Fire 880 Server Service Manual or Sun Fire V890 Server Service Manual at the Sun
●
documentation Web site:
http://docs.sun.com
The CMS software installation, maintenance, and troubleshooting document for your CMS
●
release
Avaya Call Management System Switch Connections, Administration, and
●
Troubleshooting
60
Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting
on page 60
on page 61
on page 61
on page 65
on page 74
on page 79
on page 74. For information on how to replace SCSI
Replacing SCSI cards
Maintaining HSI/P cards (R3V11 on V880 only)
on page 64
on page 83
on page 79. For information on how to install
on page 78
on page 83.
May 2006