Maintenance
Adding disk drives (optional)
If you are adding a pair of data disks (optional), you can hot-plug the disk drives without shutting
down the system.
To add a pair of data disks:
1. Unlock and open the front door.
2. Enter the following commands:
cd /
luxadm insert
The following message is displayed:
Please hit <RETURN> when you have finished adding Fibre Channel Enclosure(s)/
Device(s):
3. Attach one end of an ESD antistatic wrist strap to the system chassis sheet metal and
attach the other end to your wrist. See
information.
4. Release the drive handle on the replacement disk drive. Use your thumb and forefinger to
pinch the drive latch upward to open it.
5. Align the disk drive with slot 2. Orient the drive so that the drive handle hinge faces the
bottom of the drive bay.
116
Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting
Using an ESD wrist strap
on page 59 for more
May 2006