Rear Panel - V880 - Avaya Sun Fire V880 Installation & Maintenance

Maintenance

Rear panel - V880

The following figure shows the back panel of the V880 computer. The slots designated for
optional ethernet cards can be either Quad GigaSwift ethernet cards or single Gigabit ethernet
cards.
!
Important:
On earlier versions of the V880, the ethernet cards were installed in the following
Important:
order:
Avaya now recommends that ethernet cards be installed in the following order:
See
(not used)
52
Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting
Slots 0, 1, 2, and 5
Slots 2, 1, 6, and 5
V880 PCI card configuration
Power cord
Power supply 1
strain relief ties
on page 62 for more information.
(Reserved for future use)
(Graphics card)
(Third ethernet card, optional)
(Fourth ethernet card, optional)
(Second HSI/P card, optional, R3V11 only)
(First HSI/P card, optional, R3V11 only)
(SunSwift or
(Second ethernet card, optional)
(Not used)
v880_rear_cards.cdr
Dual SCSI/Ethernet card, required
May 2006
)