Table of Contents
Advertisement
Changing settings
Default settings
To access the Settings Mode
1 Man. cleaning
2 WaveClean
3 HACCP
08.05.2003 08:45
4 Setup
5 Diagnosis
Menu
6 Save
cookbook
7 Load
cookbook
Password
000
Setting
Time/Date
11:55
Back
36
The Space$aver™ comes from the factory pre-set. These
settings can be changed to your individual needs to a certain
extent.
Press the Left-Side Select button to access the Menu Mode.
Once in the Menu Mode and display shows "Menu", use the
CombiDial to scroll down to "4.Setup"..
Press CombiDial to select "4 Setup".
Display shows "Password" and "000".
DT/SRH
Press the Right-Hand Select button to select the display
language.
Enter the password "111" using the CombiDial and confirm
using the "Start/Stop" button.
Once the time and date are set, you can turn the
CombiDial to page through the other settings (see following
table).
Language
The display shows "Time/Date" and the setting number "000".
Press the CombiDial to set the next flashing time/date setting.
000
Turn the CombiDial to set the new value and confirm by
08.05.2003
pressing the Right-Hand Select button.
Save
Press the CombiDial to select the next setting or press the
"Left-Hand Select button to return to the start-up display.
Electric Space$aver™
Space$aver™
38
Advertisement
Table of Contents
