Table of Contents
Advertisement
Space$aver™
Custom Programming
Creating your own
programs
Copying a cooking program
Saving changed program
42
The Space$aver™ stores 300 cooking programs. There are
two options for entering your own recipes in the recipe book.
1. Duplicate a program from the cookbook, adjust the temper-
ature, time etc. of the individual program steps as desired and
save in the cookbook with a new name.
2. Create new programs steps and save in the cookbook. It
makes no difference whether you save an entered program first
or start it and then save it.
Press the "SmartMenu" button and select the cooking program
category with the CombiDial.
• Select the cooking program from the list with the Combi-
Dial. After the CombiDial is pressed, the display shows the
name of the cooking program, the number of program steps
and the accompanying temperature and time values.
• Set the temperature and time values with the CombiDial
and add program steps if necessary. The asterisk next to the
program name indicates that the original program was
changed.
• Pressing and holding the "SmartMenu" button copies the
program and shows the previous program name in the dis-
play.
• Enter a new program name with the CombiDial and save it.
Pressing and holding the "SmartMenu" button saves the new
cooking program.
• The display shows the category overview.
• Select a category and press the CombiDial.
The message "Saved" appears for 5 seconds.
The "initial screen" appears in the display once again.
Always save duplicated programs with a new name.
Electric Space$aver™
Operation
Advertisement
Table of Contents
