Table of Contents
Advertisement
Operation
Combination of Moist and Dry Heat Mode
Setting the temperature
Combi-steaming
302°F
Additiona
l
function
Setting the time
302°F
Additional
function
Probe Temperature Setting
302°F
Additional
function
Humidity Control
Using the Combi mode
1:18
158 °F
302°F
1:20
302°F
Changing the setting
End of Combi mode
"Combi-steaming" is especially suited to large roasts, cakes
and pastries.
Press the "On/Off" button..
Press the "Combi Mode" button and the display shows "302°F‹
(150°C)" and "0:00".
0:00
Turn the CombiDial to adjust the flashing temperature and
Home
press the CombiDial to confirm.
Temperature range: 86°F-482°F (30°C - 250°C).
Select the time by turning the CombiDial.
Time can be set from 1 min – 9 hours 59 min.
Continuous mode: With the time set to "0:00", turn the
CombiDial to the left and hold for 3 seconds ‹, the time display
Home
changes to "---" (Continuous Run).
Press the CombiDial twice after setting the temperature to set
the Probe temperature.
Turn the CombiDial to desired temperature and then press it to
176°F
confirm the probe temperature.
Home
NOTE: If a cooking time is entered before entering the Probe
temperature, the cooking temperature is ignored, as the Probe
temperature always takes priority.
Press the CombiDial twice after setting the setpoint
temperature to set the humidity. Use the CombiDial to set the
Humidity
humidity from 0-100% in 10% steps and then press the
90%
CombiDial to confirm percentage of humidity.
After setting the temperature and timer, or probe temperature,
press the "Start/Stop" button. The display shows the selected
cooking temperature, along with the time or probe setting. It
176°F
also shows the actual cooking time if in Continuous Run and
the actual probe temperature.
The Pre-Heat Mode may be used to pre-heat the unit before
placing product into the unit.
To display the actual cooking temperature, press and hold the
"Cooking Temperature" button.
Use the time, temperature or core temperature buttons, and the
CombiDial to change the parameters during combi-steaming.
After the cooking time has elapsed or when the core
temperature is reached, the signal sounds and the cooking
lighting will flash to indicate that the program has ended.
Pressing the "Start/Stop" key or opening the steamer door
prematurely cancels (confirms) the buzzing and flashing.
Electric Space$aver™
Space$aver™
23
Advertisement
Table of Contents
