Preheating; Starting Preheat; Steam Injection - Henny Penny Electric SpaceSaver Plus 610 Operating Manual

Space$aver™
Ready2Cook

Starting Preheat

Preheating

Actual temp.:
Nominal temp.: 356°F
Cancel
Maintain
preheating

Steam Injection

Stuffed roasts
365°F
Manual
steaming
44
Many cooking programs (e.g. baking) require the oven to be
preheated. The Preheat Mode has a temperaure range of to
preheat the oven chamber up to 527°F (275°C).
Press the Ready2Cook button: the Space$aver™ will heat to
about 15% above the temperature of step 1, of the program or
set temperature. (This addition can be changed, as described
248°F
under the "Change settings" section up to a maximum of 30%.)
Press and hold the Ready2Cook button for 3 seconds, and the
Space$aver™ automatically goes to 527°F (275°C),
regardless of the set temperature.
When preheat temperature is reached, buzzer will sound and
the display shows the holding temperature. (Standby Mode).
Open door, insert product, close door and start cooking cycle.
Ready2Cook cannot be permanently programmed in
cooking programs. The function must always be started
manually!
This function cannot be used in a custom program.
Steam injection can be used, during operation, with all
cooking modes except for "Moist Heat".
01
01/
Press the Left-Hand Select button to inject extra moisture.
0:20
Electric Space$aver™
Additional functions