Table of Contents
Advertisement
Space$aver™
Man. Cleaning
Spray cleaner
Temperature
Time
Man. Cleaning
Cleaning
Temperature
Time
Man. Cleaning
Cleaning
Temperature
Time
Cleaning door seal
64
When soaking time is over "Spray cleaner" appears in the
display.Open the door and spray the interior, the heat source and the
02/
06
122°F
fan wheel (via the openings in the ventilation guide plate) with
--:--
Cancel
cleaner
Do not operate the appliance without the fan cover in place,
or personal injury could result. Disconnect the power to
the unit when opening the fan cover, and after closing, lock
the cover in place.
Cleaning
Timer starts after door is closed.
03/
06
00:30
Cancel
Do not leave the cleaner on any longer than stipulated in the
program, or corrosion to the stainless steel could result
The actual cleaning process begins after 15 minutes of
working-in time (Moist Heat Mode).
The cooking chamber is heated to
03/
176°F (80°C) here. The display shows
06
145°F
00:13
the current temperature and the
Cancel
remaining time..
Rinsing
When timer counts down to"0:00",
"Rinse chamber" shows in the display.
Open the door and use the Manual Rinse
(left Select Button) to thoroughly rinse
the interior of the unit. Make sure to
clean behind the air baffle. Then shut the door again.
Clean the door seal as described in the section "Cleaning door
seal". Then close the door again:
Drying
Drying is started automatically once the door has been closed (Dry
Heat at 266°F or 130°C, 5 minutes). The cooking chamber is
heated to 266°F here. The display shows the current
temperature and the remaining time.
When the timer counts down to "0:00", the buzzer sounds. Open
the door and leave it open slightly until the next time it is used. This
extends the life of the door gasket and prevents dampness building-
up in the unit.
Deliming
See Deliming Section of the Service Manual.
Electric Space$aver™
Cleaning
Advertisement
Table of Contents
