Table of Contents
Advertisement
4.5.3 Changing the basic settings
INFORMATION
Prerequisite Unit functions menu open
The basic settings for operation can be displayed, changed and exported by
entering the password "111".
Opening the setting menu
1. Tap the "Settings" field.
The PIN window opens.
2. Enter password.
3. Tap the Confirm button.
The Unit settings menu is displayed.
Basic settings can be changed.
In addition to those described in this chapter, there are the
following further functions.
Audio settings
Selection of the volume of the signal tones.
Operation lock
Various settings as to whether and when operation lock is to be
activated.
Entering and changing the code word.
Standby mode
Deactivate the operation inhibit to set the standby mode.
When the standby mode is active, the touchscreen goes dark after a
set time. The cooking chamber light switches off.
Setting the background lighting
This setting is used to reduce the brightness of the touchscreen.
CombiDoctor
CombiDoctor uses a selectable self-diagnostic program to check the
components for climate control and cleaning.
Operating instructions
Operating the unit
29
Advertisement
Table of Contents
