Table of Contents
Advertisement
Operation
1
2
Settings
No.
Standard
Local time
Time/Date
000
operator
Light flashes
023
Preheating
082
factor %
Water
maintenance
076
litre
DD.MM.YY
Date format
144
Temperature
in °C
006
display
Cookbook
097
Time delay
032
fan
Cooling
024
Standard
water
3
4
Setting range
setting
Time/date
On
On/Off
15
0-30%
0-90,000 L in
0
100-L
increments
DD.MM.YYYY
YYYY/MM/DD
YY
MM/DD/YYYY
°C/°F
Free
Free
Locked:
Fully locked
Off
Off/On
Minimum -
Maximum
Electric Space$aver™
Space$aver™
5
Explanation
Automatic change between summer time / winter
time
See parameter No. 144 for date format
"On" means that when cooking is completed, the
light will flash in addition to the buzzer sounding.
The duration of the flashing matches the buzzerr, i.e.
if thebuzzeris set to "0", the light will not flash (even
if flashing is activated).
Increase the preheating factor if fully loaded with
large amounts (roasts, bread loaves) so that the
temperature does not drop too severely.
For external water-treatment systems, for connection
to soft water only. Confirm receipt of the mainte-
nance request with the "Read" button. The mainte-
nance request is repeated until maintenance occurs
and the "Done" button is finally pressed.
TT = Day
MM = Month
JJJJ = Year
12 or 24 hour clock
The temperature display in °F is not linked to the
English display text.
Programs in the Cookbook can be changed, deleted,
or saved.
Programs in the Cookbook cannot be changed,
deleted, or saved. However, changes can be made
during cooking.
Changes cannot be made to the Cookbook or during
the cooking process.
When "On", the fan runs during the time delay to
cool the oven chamber with a block of ice in the
bottom drawer.
For this purpose, place the perforated container in
the closed container, fill with approximately 4 litres
of water and allow to freeze. Insert the ice block into
the perforated container at the lowest level. This
allows a temperature of 57°F to be maintained for up
to 6 hours
"Minimum" setting: Minimum water consumption
but higher condensation temperature and greater
amount of waste steam.
"Maximum" setting: Maximum water consumption
but lower condensation temperature and less waste
steam.
39
Advertisement
Table of Contents
