Starting Srh - Henny Penny Electric SpaceSaver Plus 610 Operating Manual

Operation
Setting SRH cooking mode
25.03.03 09:30
Menu ∆T/SRH
∆T cooking SRH
Confirm
Back
SRH
140°F
0:00
Add
HOME
Function
SRH
140°F
0:00
Add
HOME
Function
SRH
140°F
-:--°F
Add
HOME
Function
∆T combi steaming
Delta (∆): Target CT: 01
68°F 140°F
Add
HOME
Function

Starting SRH

Total cycle time
Number of program stages
Program stages
Active program stage
4:20
Dry Heat
248°F
0:20
Cycle time or probe temperature
Selected
of the active program stage
temperature
Cooking mode
4:00
248°F
4:00
Press the On/Off button.
Before SRH cooking, enter the first program step, i.e. "Dry
Heat", "Moist Heat", "Combination of Moist and Dry Heat" or
"Rethermalization" (see also the "Entry of several program
steps" chapter).
Press the Right-Select button to select "
"D
T" and "SRH" shows in display and "
Turn CombiDial to select "SRH" and press to confirm.
01/
Select a cooking mode for the first step of the SRH processl
01
The display shows cooking temperature of 140°F (60°C)
flashes in the display.
Turn the CombiDial to set the temperature 86-250°F
02/
(30-120°C) and press to confirm.
02
The display flashes cooking time "0:00".
Turn the CombiDial to set the cooking time, or press
CombiDial again to change from time to probe cooking.
02/
02
The temperature display flashes. Set the final core temperature
104-210°F (40-99°C) with the CombiDial.
02/
Note: If a cooking time is entered before entering the final core
02
temperature, the control system will ignore this, as the core
temperature always takes priority.
01/
Once the core temperature is entered, press the CombiDial to
enter another program step.
Pressing the CombiDial twice, the display reverts to the first
program step.
Start the program with the Start/Stop button.
The display shows:
Number of program steps
01/
02 Current program step
Cooking temperature
Cooking mode
Probe temperature or Time remaining.
01/
02
Electric Space$aver™
Space$aver™
D
T/SRH"
D
T cooking" flashes.I
35