Setting The Pattern Number; Setting The Item Data - JUKI LK-1900S-SS Instruction Manual

5-2. Setting the pattern number

5-3. Setting the item data

When you press EDIT key
The items that can be edited are displayed on the left section of the screen and the set contents are dis-
played on the right section of the screen.
Select an item with ITEM SELECT key
❼ .
(1) Inputting the X size
❼
❽ , the item data input screen is displayed.
❻ . Then, change the set content with DATA CHANGE key
❽ ❻ ❼
－
Turn ON the power switch.
The pattern number is displayed at the upper left por-
tion of the screen. The pattern shape, X/Y scale rate
and sewing speed of the pattern are also displayed.
When you press DATA CHANGE key
pattern number can be changed.
Refer the pattern No. to the separate table.
Press ITEM SELECT key
C001 X size.
Press DATA CHANGE key
value you desire.
One of the input method for the X/Y sizes can be
selected; i.e., by inputting a percentage (%) with
memory switch U064 or by inputting an actual value.
(Initial value: Input in terms of percentage (%))
The setting exceeding 100% is dangerous
since needle and the cloth presser inter-
feres with each other and needle breakage
or the like will occur.
－
18
❼ , the
❻ to display the
❼ to display the