Figure 4-3 Lifting Bar Label - Siemens SINAMICS GM150 Operating And Installation Instructions

Note
Transporting the option cabinet
When transporting an option cabinet, the force is absorbed via the screwed-on U sections.
Remove the U sections after transporting the cabinet.
Note
Lifting bars
The lifting bars are not included in the scope of delivery.
Inadequately dimensioned lifting rods
Inadequately dimensioned lifting rods are liable to bend or break. The drive could drop off the
crane. This can result in death, serious injury or material damage.
Use suitable lifting rods for transporting. The weight of the cabinet is indicated on the rating
plate.
NOTICE
Improper lifting
If the transport unit is lifted incorrectly, this can damage the decorative trim, cabinet doors,
or fans.
Protect the cabinet and protruding parts against damage.
Always lift the transport units with the appropriate spreading devices or hoisting tackle.
Procedure
1. If there are several holes, select which holes to use based on the center of gravity.
2. Push the lifting bars through the holes.
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017
WARNING
Figure 4-3 Lifting bar label
Preparations for use
4.3 Transportation
79