Transportation; Transport Markings; Transport Requirements - Siemens SINAMICS GM150 Operating And Installation Instructions

Preparations for use

4.3 Transportation

4.3 Transportation
The terms are defined as follows in the following part of the instructions:
● "Transportation unit" refers to the unit before it has been unpacked
● "Cabinet" refers to the unit after it has been unpacked
4.3.1

Transport markings

The packing differs depending on the transport type and size. If not otherwise contractually
agreed, the packaging corresponds to the packing guidelines for International Standards for
Phytosanitary Measures (ISPM).
Note the symbols which appear on the packing. These have the following meanings:
Top
4.3.2

Transport requirements

● Persons driving cranes and fork-lift trucks must hold appropriate licenses.
● You must observe the specifications to avoid transport damage to the enclosure and you
● When lifting the drive, use only approved and undamaged sling guides and spreaders of
● When lifting, refer to the information on the lifting plate or in "Technical data and drawings."
NOTICE
Vibrations
Significant vibration during transportation and shocks when setting down can damage the
equipment.
Avoid vibrations and shocks.
76
Fragile material
must maintain the permissible climatic conditions during operation in accordance with
IEC 60721-3-1/2/3. Please also observe the "Technical specifications" instructions.
sufficient rated capacity. Check these before using them. The weight of the drive is specified
on the rating plate.
Comply with the specified spreading angles.
Keep dry Keep cool Center of Do not use
gravity hand hook
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017
Attach here