Removing The Dust Protection Cover Of The Closed-Loop Control Cabinet - Siemens SINAMICS GM150 Operating And Installation Instructions

5.10.2

Removing the dust protection cover of the closed-loop control cabinet

Note
All Makrolon parts that need to be removed are marked with a red sticker and the item number.
①
Expanding rivets
②
Expanding rivets
③
Expanding rivets
④
Overall configuration, curtain
Pos. 10 Makrolon plate, center front
Pos. 20 Makrolon strip, left
Pos. 60 Makrolon strip, right
Figure 5-7 Dust protection cover, closed-loop control cabinet
1. Using flat-nose pliers, pull off all expanding rivets
2. Pull off the two expanding rivets
3. Using flat-nose pliers, pull off all expanding rivets
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017
"Pos. 10".
curtain.
Pos. 60" and remove the side strips.
5.10 Removing the dust protection cover
①
and remove the Makrolon plate
② ④
of the curtain using flat-nose pliers, and remove the
③
of the two Makrolon strips "Pos. 20,
Installation
95