Lifting The Cabinet Off The Transport Pallet; Opening Doors In Preparation For Use; Checking The Shock And Tilt Indicators Inside The Cabinet - Siemens SINAMICS PERFECT HARMONY GH150 6SL3826 Operating Instructions Manual

Medium-voltage drive

Table of Contents

Preparations for use

4.4 Unpacking the cabinets

To extract the load securing device, proceed as follows:

1. Remove the retaining straps.

2. Remove the spacers such as wooden wedges, air cushions, etc.

4.4.3

Lifting the cabinet off the transport pallet

Use a crane to lower the transportation units from the transport pallets and transport them to the

installation site. Observe the guidelines described in the section "Transport with a crane."

4.4.4

NOTICE

Damage to the locking mechanism caused by incorrectly opening the doors

You can damage the locking mechanism if you open the doors incorrectly.

● When opening the doors, follow the steps described.

● If the locking mechanism is damaged it is essential that you have it repaired before

4.4.5

Shock and tilt indicators are also located inside the cabinet. Check these as soon as you have

unpacked and opened the device. To perform the check, proceed as described in "Checking

shock and tilt indicators"

NOTICE

Material damage caused by shipping indicators remaining in the device during operation

During operation, the shipping indicators can become detached and fall into the device as a

result of high temperatures. Material or temperature damage may result.

● Remove the shipping indicators before commissioning. Remove any adhesive residue