Maintenance
9.7 Repairs
Replacing the sponge
①
②
Figure 9-18
1. Remove the retaining screws
2. Take out the sponge
3. Insert a new sponge and then push it up to the stop of the screw.
4. Reattach the leakage water detection.
9.7.11
Replacing the Power Stack Adapter
Required tools
● Torx screwdriver Tx30
● 2.5 mm slotted screwdriver
224
Retaining screws
Sponge
Replacing the sponge
②
Note
Insert the sponge
Make sure that the leakage water measurement is on the bottom pan. The distance between
sponge and bottom pan is then approx. 1 mm.
①
.
.
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017