Figure 4-6 Lifting Bar Label; Figure 4-7 Securing The Lifting Rods - Siemens SINAMICS GL150 Operating Instructions & Installation Instructions

NOTICE
Damage due to incorrect lifting
If the transport unit is lifted incorrectly, this can damage the decorative trim, cabinet doors, or
fans.
● Protect the cabinet and protruding parts against damage.
● Always lift the transport units with the appropriate spreading devices or hoisting tackle.
Procedure
1. If there are several holes, select which holes to use based on the center of gravity.
2. Push the lifting bars through the holes.
3. Place the sling ropes on the lifting bars so they are close to the cabinet. Secure the ends of
4. To lift the transport unit, use single sling ropes or two ropes with a cross stitch. Attach the
5. Lift the cabinet. Avoid shifting the center of gravity or distorting or damaging the cabinet.
SINAMICS GL150 6SL38502UM114PA0Z
Operating Instructions Rev.201910281441 EXAMPLE
Figure 4-6 Lifting bar label
the lifting bars using the splint.
Figure 4-7 Securing the lifting rods
crane rope to the lifting rods so it is close to the cabinet.
When suspended, the cabinet must be parallel to the ground.
Preparations for use
4.4 Transportation
59