Additional Terminal Module Tm15 (Option G63); Indicator Lamps In The Cabinet Door (Option K20); Display Instruments In The Cabinet Door For Voltage, Current, Speed, And Output Plus Indicator Lamps (Option K21) - Siemens SINAMICS GM150 Operating And Installation Instructions

Description
3.6 Description of options
3.6.14

Additional Terminal Module TM15 (option G63)

One TM31 and two TM15 Terminal Modules are already part of each standard variant of the
drive. The Terminal Modules are used for the following functions:
● Inclusion of warning and fault messages and control signals
● Communication with a higher-level control level.
With the optional additional Terminal Module TM15, you can also expand the number of digital
inputs and outputs. The expansion makes sense for the following applications:
● Reading in and processing external signals in addition to the existing terminal strip available
● Controlling external components.
The Terminal Module TM15 comprises the following elements:
● 24 bidirectional digital inputs and outputs (isolation in three groups of eight channels).
● 24 green status LEDs for indicating the logical signal status of the relevant terminal
3.6.15

Indicator lamps in the cabinet door (option K20)

This option provides five lamps in the cabinet door of the control section that indicate the
operating status of the drive.
● Fault (red)
● Alarm (yellow)
● Operating (green)
● Ready for operation (white)
● Operation in local mode (white)
3.6.16 Display instruments in the cabinet door for voltage, current, speed, and output
plus indicator lamps (option K21)
Analog display instruments that display process variables as % are integrated in the cabinet
door:
● Motor current (0 to +120%)
● Motor speed (–120% ... 0 ... +120%)
● Calculated motor power (0 to +120%)
● Motor voltage (0 to +120%).
58
as standard.
Note
Option K21 contains option K20.
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017