8.2.2
Configuration of the AOP30 operator panel
8.2.2.1
Define operation screen
Depending on the type of drive, an operation screen with ten different display parameters is
the default.
Figure 8-4
You can customize the display of the operation screen. The following types of display are
available:
● Values
● Bars
● Mixed
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017
Example of the operation screen
– 2 digital values
– 10 values
The order of the entries in this screen determines the order of the operating variables
(parameters) displayed in the operation screen.
– 3 bars
– 8 values / 1 bar
– 4 values / 2 bars
Order of the display: First the parameters to be displayed digitally and then the
parameters to be displayed as bars.
8.2 Operation via the AOP30 operator panel
Operation
131