Start-up
7.2 Description and configuration of the PROFIBUS interface
PROFIBUS address switches
The PROFIBUS address switch is located under the cover.
Figure 7-6
7.2.3
Connecting PROFIBUS cables
The figure below shows suitable PROFIBUS connectors with/without a programming device/
PC connector.
Figure 7-7
1. Connect the cables to the PROFIBUS connector. The bus terminating resistors are located
2. Connect the cable shield over a wide area on both sides.
122
③
PROFIBUS address switch cover
PROFIBUS connectors
in this connector.
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017