Opening Doors In Preparation For Use - Siemens SINAMICS GM150 Operating And Installation Instructions

4.4.4

Opening doors in preparation for use

NOTICE
Incorrectly opening the doors
If you incorrectly open the doors, then this can damage the locking mechanism.
● When opening the doors, follow the steps described.
● You must replace a damaged locking mechanism before commissioning, which will be
4.4.4.1 Opening doors in preparation for use
The converter is delivered in a closed state. A label showing how to open the doors in a current-
free state is located on the door.
Figure 4-6
Proceed as follows:
1. A screw marked with a label is located in the door. Under the screw you will find the opening
2. Insert a screwdriver into this opening.
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017
charged for. Contact the service center in this regard. You can find the relevant contact
person under "Service & Support".
Example: Label with instructions for opening the doors
for manually opening the doors. Remove the screw.
Figure 4-7 Example: Cover screw for manual door interlocking
Preparations for use
4.4 Unpacking
83