Commissioning / Service Drive Commissioning; Table 8-4 Drive Object Vectormv - Siemens SINAMICS GM150 Operating And Installation Instructions

Operation
8.2 Operation via the AOP30 operator panel
8.2.3.5

Commissioning / service drive commissioning

Commissioning / service / drive commissioning menu structure
Figure 8-11
1. Press the <Menu>. key
2. Press the <▼> function key to select the "Commissioning/Service" row. Press the <OK>
3. Press the <▼> function key to select the "Device commissioning" row. Press the <OK>
4. Press the <▼> function key to select the desired menu item.
Basic commissioning
In this menu, you can set the following parameters for the basic parameterization:
Table 8-4
Parameter
p700[0]
p1000[0]
p1070[0]
p1080[0]
p1082[0]
p1120[0]
p1121[0]
p1135[0]
Complete commissioning
In this menu, all of the parameters of the basic parameterization except for the parameters of
the DO B_Infeed can be set.
152
Commissioning / service / drive commissioning menu structure
function key to confirm the selection.
function key to confirm the selection.
Drive Object VectorMV
Parameter text
Macro binector input (BI)
Macro connector inputs (CI) for speed setpoints
CI: Main setpoint
Minimum speed
Maximum speed
Ramp-function generator ramp-up time
Ramp-function generator ramp-down time
OFF3 ramp-down time
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017