Ricoh Pro C7100s Operating Instructions Manual page 92

2. Basic Copying
2. Make sure that [Specify Cut Size] is selected.
3. Enter the position of the cut for each edge using the number keys, and then press [ ].
Press [Head Edge], and then enter the cut position for the head edge using the number keys.
Press [Tail Edge], and then enter the cut position for the tail edge using the number keys.
• You can adjust the position of the fore edge cut from 6.0 to 50.0 mm (0.24 to 1.96 inches) in 0.1
mm (0.01 inches) increments.
• You can shift the position of the head and tail edge cuts from 6.0 to 28.0 mm (0.24 to 1.10 inches)
in 0.1 mm (0.01 inches) increments.
• For details about how to perfect bind, see page 83 "Perfect Binding".
Finishing to a regular size
Specify the size of the finished bound booklets and cut three edges to a regular size.
Book block paper and cover sheet compatibility
If you specify finishing to a regular size, you can select one of the following sizes: A4 , B5 JIS ,
1
A5 , 8 / × 11 , 5
2
We recommend that you use the cover sheet size with the book block paper sizes as shown in the
following table.
Required finished size
A4
B5 JIS
90
1 1
/ × 8 /
2 2
Book block
SRA4
226 × 310 mm
A4
13 × 19
*1
13 × 19
13 × 18
SRA3
A3
Cover
1
/
5