Ricoh Pro C7100s Operating Instructions Manual page 134

4. Advanced Copying
2. Press [Copier / Document Server Features].
3. Press [Stamp].
4. Press [User Stamp].
5. Press [Program / Delete Stamp].
6. Press the stamp number you want to program.
7. Enter the user stamp name (up to 10 characters) with the letter keys, and then press [OK].
8. Enter the horizontal size of the stamp with the number keys, and then press [ ].
9. Press
10. Enter the vertical size of the stamp with the number keys, and then press [ ].
11. Place the original for user stamp on the exposure glass, and then press [Start Scanning].
12. Press the [User Tools] key.
• If the stamp number is already being used, the machine will ask you if you want to overwrite it.
Press [Yes] or [Stop].
• You cannot restore the overwritten stamp.
• Stamp numbers with
are marked with "Not Programmed".
• For details about how to enter text, see "Entering Text", Getting Started.
Deleting the user stamp
Deletes an image registered as a user stamp.
You cannot restore a deleted stamp.
132
(Vertical).
already have settings in them. Stamp numbers that are not registered yet