Ricoh Pro C7100s Operating Instructions Manual page 39

• If you set [Number of Tabs] to [Off], surplus tab stock sheets for each copy are not ejected.
Copying onto tab stock from the multi bypass tray (Tray A)
1. Load the paper face up in the multi bypass tray (Tray A).
2. Press [Tray A].
3. Make sure that [Paper Size] is selected.
4. Specify the paper size, and then press [OK].
5. Press [Special Paper].
6. Press [Tab Stock].
7. Specify the shift value using [ ] or [ ] under Tab Position Shift, and then press [OK].
8. Place the originals, and then press the [Start] key.
• For details about using tab stock, see page 34 "Copying onto Tab Stock".
BZH057
Copying onto Various Types of Paper
37