Ricoh Pro C7100s Operating Instructions Manual page 150

4. Advanced Copying
This function has the following three types:
Erase Border
Erases the edge margin of the original image.
Erase Center
Erases the center margin of the original image.
Erase Center/ Border
Erases both the center and edge margins of the original image.
Erases the edge margins and center part of originals regardless of original orientation.
You can change the width of the erased part in a range from 2 to 99 mm (0.1 to 3.9 inches).
• To erase the image on the back side of the original, press [2 Sided Setting], and then [Back Side].
Erasing the image on the back side is valid when you copy two-sided originals.
• The width of the erased margin varies depending on the reproduction ratio.
• You can change the settings for the erase width under [Edit] in User Tools. For details, see
page 223 "Edit".
Erase Border
Erases the edge margin of the original image.
There are two types in the Erase Border mode.
Same Width
Erase the same width of edge margins of the original image.
Different Width
Erase the edge margins of the original image at different widths.
148
CKN041
CJF010