Ricoh Pro C7100s Operating Instructions Manual page 84

2. Basic Copying
Original orientation and punch hole position
Place all the originals in the ADF in the orientation in which they can be read normally. When
placing the original on the exposure glass, keep the same orientation, but set the original facing
downwards.
The relationship between the orientation in which you place the original and the punch hole
positions is as follows:
Left
Top
Right
*1 The above table shows punching positioning. The orientation of the paper does not indicate direction of
delivery.
82
CWR068
Placing the original
on the exposure
glass
Placing the
Punching position
original in the ADF
*1