Ricoh Pro C7100s Operating Instructions Manual page 71

• Textured paper
• Label paper (adhesive labels)
• Envelopes
• Magnet paper
• Metallic/pearl paper
• Clear file folder
• Synthetic paper
• Paper fed from the interposer can be folded.
• Copying will stop if the number of copies exceeds tray capacity. If this happens, remove copies
from the folding unit tray to resume copying. The finisher automatically ejects the maximum number
of folded sheets to the finisher booklet tray.
• The printed side of the paper may occasionally be scratched or stained with toner depending on
the paper and the conditions of the machine's environment.
• Print quality over fold lines might be reduced. This is due to cracking within the fused toner. Loss of
surface along fold lines can also occur with some types of paper. To avoid possible wastage, print
a single test sheet before beginning a print run.
• The capacity of the folding unit tray or finisher tray may vary depending on the fold settings and the
condition of the paper.
• For details about which sizes and weights of paper that can be folded, see "Specifications",
Maintenance and Specifications.
• You can specify the fold-back position in [System Settings]. For details about how to adjust the fold-
back position, see "General Features", Connecting the Machine/ System Settings.
Z-fold
Makes two parallel folds, one of which faces in and the other facing out.
CNP005
Finishing
69